Guide Rail Straightening Machine - machine view
This image is temporarily unavailable. Please select another view or try again later.
ZJZJ-DG100D-3D
Guide Rail Straightening Machine
For guide rail straightening and torsion correction. Cross-section: 20 × 18 to 125 × 115 mm; length: 800-6,500 mm.
- Guide Rail Cross-Section
- 20×18 ～ 125×115mm
- Length
- 800 ～ 6500mm
- Bending After Straightening
- ≤ 0.15mm
- Maximum Straightening Force
- 1000KN
Selection Considerations
Bending & Twist Correction
After correction: bending ≤0.15 mm and twist ≤0.1 mm. These values address separate guide rail bending and twist requirements.
Correction Force & Torque
Maximum straightening force: 1,000 kN; maximum torsion correction torque: 25,000 N·m; cycle time: 300-900 s.
Technical Specifications
Guide Rail Straightening Machine
| Representative Model | ZJZJ-DG100D-3D |
|---|---|
| Guide Rail Cross-Section | 20×18 ～ 125×115mm |
| Length | 800 ～ 6500mm |
| Twist | ≤ 0.1mm |
| Repeatability | ±0.005mm |
| Maximum Straightening Width | 125mm |
| Maximum Straightening Force | 1000KN |
| Driving Method | Rack & Pinion |
| Bending After Straightening | ≤ 0.15mm |
| Cycle Time | 300~900s |
| Maximum Torsion Correction Torque | 25000NM |
| Correction Force | MAX 100 tonnes-force |
