Gear Ring Roundness Correction Machine II - machine view
This image is temporarily unavailable. Please select another view or try again later.
ZJZJ-100D-4C1Y
Gear Ring Roundness Correction Machine II
For gear ring roundness correction. Outside diameter: Ø250-1,500 mm; height: 20-120 mm.
- Outside Diameter
- ф250 ～ ф1500mm
- Height
- 20 ～ 120mm
- Cycle Time
- 40~240s
- Driving Method
- Gripper
Selection Considerations
Type II Gear Ring Range
Outside diameter: Ø250-1,500 mm; wall thickness: 20-60 mm; height: 20-120 mm. Maximum force: 100 tonnes-force.
Gripper-Driven Roundness Correction
Select 1-4 measurement points. Correction accuracy: 0.05-0.8 mm; cycle time: 40-240 s.
Technical Specifications
Gear Ring Roundness Correction Machine II
| Representative Model | ZJZJ-100D-4C1Y |
|---|---|
| Outside Diameter | ф250 ～ ф1500mm |
| Wall Thickness | 20 ～ 60mm |
| Height | 20 ～ 120mm |
| Measured Points | 1-4 (selectable) |
| Correction Points | 2-3 |
| Repeatability | ±0.005mm |
| Measurement Cycle Time | 5 ～ 60s |
| Measurement Speed | 30 ～ 600rpm |
| Driving Method | Gripper |
| Correction Accuracy | 0.05~0.8mm |
| Cycle Time | 40~240s |
| Correction Force | MAX 100 tonnes-force |
