Long-Shaft Straightening Machine - machine view
This image is temporarily unavailable. Please select another view or try again later.
ZJZJ-160D-15C15Y
Long-Shaft Straightening Machine
For long-shaft straightening. Shaft diameter: Ø40-160 mm; length: 1,500-9,000 mm.
- Shaft Outside Diameter
- ф40 ～ ф160mm
- Shaft Length
- 1500 ～ 9000mm
- Cycle Time
- 80~900s
- Driving Method
- Centers / Rollers
Selection Considerations
Multi-Point Long-Shaft Correction
For shaft lengths of 1,500-9,000 mm. Select 1-15 measurement points and 1-15 correction points. Maximum force: 160 tonnes-force.
Check Repeatability by Drive Method
Repeatability is within ±0.002 mm with center drive and ±0.0035 mm with roller drive. These values are specific to the drive method and are not interchangeable.
Technical Specifications
Long-Shaft Straightening Machine
| Representative Model | ZJZJ-160D-15C15Y |
|---|---|
| Shaft Outside Diameter | ф40 ～ ф160mm |
| Shaft Length | 1500 ～ 9000mm |
| Measured Points | 1-15 (selectable) |
| Correction Points | 1-15 (selectable) |
| Repeatability | Centers: within ±0.002 mm; rollers: within ±0.0035 mm |
| Measurement Cycle Time | 1 ～ 10s |
| Measurement Speed | 30 ～ 600rpm |
| Driving Method | Centers / Rollers |
| Straightening Accuracy | 0.050~0.250mm |
| Cycle Time | 80~900s |
| Correction Force | MAX 160 tonnes-force |
