Straightening Machine Safety Procedures
1. Before starting, inspect the electrical equipment and check for correct operation. If a fault is found, stop the machine and arrange inspection and repair.
2. Machine parameters and performance are designed for the customer's production requirements. Unauthorized modifications are prohibited.
3. During operation, follow the lead operator's instructions to prevent incorrect operation.
4. Select pressure and tooling according to the workpiece size, material and thickness. Position the workpiece flat and securely before operating the controls.
Keep hands and tools away from the lower die and pressing area while the machine is operating.
5. Do not overload the machine or operate it with a fault. Do not use misaligned upper and lower tooling.
6. On completion, disconnect the power, carry out the required equipment care and clean the work area.
7. If abnormal behavior occurs, such as unreliable movement, excessive noise, vibration or impact, stop and inspect the machine. Identify and correct the fault before restarting.
For faults or maintenance requirements, contact Ruiming for professional service to maintain machine performance and avoid unnecessary damage.
